400 series, Induction Cooktop Module, 36'', VI492611 Gaggenau VI492611

400 series, Induction Cooktop Module, 36'', VI492611

Regular price
$6,199.00
Sale price
$6,199.00
Regular price
$6,889.00
Sold out
Unit price
per 
Shipping calculated at checkout.

  • Flex function for combining the rectangular cooking areas
  • Free positioning of cookware inside combined cooking areas
  • Frying sensor function for temperature control in pans
  • Large cooking zone for pots up to ø 32 cm
  • Ideal for the original wok pan with round bottom, with wok ring
  • Easy control of all functions with bicoloured display
  • Solid stainless steel control knob
  • Precision crafting of 3 mm stainless steel
  • For surface mounting with a visible edge or for flush mounting
  • Can be combined perfectly with other Vario appliances of the 400 series
Cooking zones
  • 2 flex induction cooking areas 19x21,5 cm (2200 W, with booster 3600 W), linked together 38x21,5 cm (3300 W, with booster 3600 W).
  • 1 induction cooking zone ø 8 1/4" (21cm) (2200 W, with booster 3700 W), automatically switches to ø 10 1/4" (26cm) (2600 W, with booster 3700 W) and to ø 12 5/8" (3300 W, with booster 3700 W).
Handling
  • Control knobs with illuminated ring, cooking zone and output level markings.
  • Electronic power control in 12 stage (1…12).
  • User friendly control with bicoloured display (white / orange).
Features
  • Flex function for rectangular cooking areas.
  • Frying sensor function.
  • Booster function.
  • Stopwatch.
  • Short-term timer.
  • Options menu.
Safety
  • Individual residual heat indicators.
  • Safety shut-off.
Planning notes
  • Depending on the type of installation (surface-mounted or flush-mounted), the specific location of the cut-out and the knob positions may vary.
  • The horizontal positioning of the knobs may be aligned with the specific cooking areas and zones.
  • The drawing "Installation of the control knob" must be observed if the panel is more than 23 mm thick (there must be a recess at the rear).
  • If combining several Vario appliances of the 400 series, a connection strip VA 420 must be placed between the appliances. Depending on the type of installation, the corresponding connection strip must be provided.
  • The bearing capacity and stability, in the case of thin worktops in particular, must be supported using suitable substructures. Take into account the appliance weight and additional loads.
  • Additional instructions for flush mounting:
  • Installation is possible in worktops made of stone, synthetics or solid wood. Heat resistance and watertight sealing of the cut edges must be observed. Concerning other materials please consult the worktop manufacturer.
  • The groove must be continuous and even, so that uniform placing of the appliance on the gasket is ensured. Do not use discontinuous lining.
  • The joint width may vary due to size tolerances of the combinations and of the worktop cut-out.
  • If installing several appliances in individual cut-outs allow for a division bar of minimum 50 mm between the individual cut-outs.
  • Operates with magnetic (induction) iron pots and pans only. For an optimal heat distribution, the use of sandwich bottom cookware is recommended.
  • Appliance can be snapped into the worktop from above.
  • Appliance weight: approx. 21.
Connection
  • Total connected load 9.4 KW.
  • Connecting cable 1.0 m without plug.

For more details:

product_data_sheet_VI492611

user_manual_IU_VI492611

user_manual_II_VI492611