400 series, Induction Cooktop, 36'', CX492611
400 series, Induction Cooktop, 36'', CX492611 Gaggenau CX492611
  • Load image into Gallery viewer, 400 series, Induction Cooktop, 36'', CX492611
  • Load image into Gallery viewer, 400 series, Induction Cooktop, 36'', CX492611 Gaggenau CX492611

400 series, Induction Cooktop, 36'', CX492611

 

On display in store  

  • One single big cooking surface
  • Free positioning of cookware
  • All sizes and formats of cookware can be used
  • TFT touch display for an intuitive control of all functions
  • Cooking sensor function for temperature control in pots
  • Professional cooking functions
  • Max. power output for big cookware of up to 5.5 KW
  • Precision crafting of 3 mm stainless steel
  • For surface mounting with a visible edge or for flush mounting
  • Can be combined perfectly with other Vario appliances of the 400 series
Cooking zones
  • One unique cooking surface of 3200 cm².
  • Up to 6 items of cookware can be placed simultaneously on the cooktop.
Handling
  • Easy to use colour graphic TFT touch display with use indications.
  • Electronic power control in 17 stage 1,1.,2..9.
Features
  • Cooking sensor function.
  • Professional cooking function.
  • Dynamic cooking function.
  • Teppan Yaki function.
  • Booster function for pots.
  • Booster function for pans.
  • Keep warm function.
  • Individual pot detection.
  • Cooking timer for each cooking position.
  • Stopwatch.
  • Short-term timer.
  • Information key with use indicators.
  • Power management.
  • Cooktop-based ventilation control (with suitable hood).
  • Home network integration for digital services (Home Connect) wireless via WiFi.
  • The use of the Home Connect functionality depends on the Home Connect services, which are not available in every country. For further information please check: home-connect.com.
Safety
  • Main switch.
  • Residual heat indication.
  • Child lock.
  • Safety shut-off.
  • Pause function.
Planning notes
  • Depending on the type of installation (surface-mounted or flush-mounted), the specific definition of the cut-out must be observed.
  • If combining several Vario appliances of the 400 series, a connection strip VA 420 must be placed between the appliances. Depending on the type of installation, the corresponding connection strip must be provided.
  • The bearing capacity and stability, in the case of thin worktops in particular, must be supported using suitable substructures. Take into account the appliance weight and additional loads.
  • Additional instructions for flush mounting:
  • Installation is possible in worktops made of stone, synthetics or solid wood. Heat resistance and watertight sealing of the cut edges must be observed. Concerning other materials please consult the worktop manufacturer.
  • The groove must be continuous and even, so that uniform placing of the appliance on the gasket is ensured. Do not use discontinuous lining.
  • The joint width may vary due to size tolerances of the combinations and of the worktop cut-out.
  • If installing several appliances in individual cut-outs allow for a division bar of minimum 50 mm between the individual cut-outs.
  • Operates with magnetic (induction) iron pots and pans only. For an optimal heat distribution, the use of sandwich bottom cookware is recommended.
  • The wok pan WP 400 001 cannot be used with this appliance.
  • Appliance can be snapped into the worktop from above.
  • Appliance weight: approx. 35.
Connection
  • Connecting cable 1.0 m without plug.
  • Please check the user manual for how to switch off the WiFi module.

For more details:

user_manual_HC_CX492611

user_manual_IU_CX492611

user_manual_II_CX492611

product_data_sheet_CX492611