Skip to product information
1 of 1

Gaggenau

400 series, Vario Downdraft Ventilation, Stainless steel

400 series, Vario Downdraft Ventilation, Stainless steel

Model Number: VL414712

  • Can be combined perfectly flush with other Vario appliances of the 400 series
  • Precision crafted 1/8-inch stainless steel frame
  • Solid stainless steel control knobs
  • Highly efficient, low noise ventilation system especially with remote fan unit AR 410 710
  • Function for automatic, sensor-controlled power adjustment depending on the build-up of cooking vapors
Output
  • Noise level depends on the built-in situation

Consumption data
  • Consumption data is referred to a configuration with the recirculation blower AR 410 710.
  • Sound level min. 57 dB / max. 71 dB normal mode

For more details:

https://media3.gaggenau.com/Documents/9001277533_B.pdf

https://media3.gaggenau.com/Documents/9001601009_B.pdf

https://media3.gaggenau.com/Documents/18056419_Gaggenau-VL414712-ventilation-specification-sheet.pdf


Feature

3 electronically controlled power levels and 1 intensive mode.

Grease filter saturation indicator.

Patented rim extraction filter, dishwasher-safe.

Airflow-optimised interior for efficient air circulation.

The package includes an one-way flap.

Planning note

Please refer to the models and dimentions for recommended configurations of downdraft ventilations and blower units and the needed ducting elements.
For each VL one blower is recommended.
If operated next to gas appliances, the air deflector AA 414 010 is recommended to ensure maximum performance of the cooktop.
Appliance can be snapped into the countertop from above.
Depending on the type of installation - surface- or flush-mounted, with or without cover - the specific location of the cut-out and the control knob positions may vary.
If combining several Vario appliances of the 400 series, a connection strip VA 420 must be placed between the appliances. Depending on the type of installation, the corresponding connection strip must be provided.
The bearing capacity and stability, in the case of thin countertops in particular, must be supported using suitable substructures. Take into account the appliance weight and additional loads.
Additional instructions for flush mounting:
Flush installation is possible in countertops made of stone, synthetics or solid wood. Heat resistance and watertight sealing of the edges must be observed. For other materials, please consult with your countertop manufacturer.
The groove must be continuous and even, so that uniform placing of the appliance on the gasket is ensured. Do not use discontinuous lining.
The joint width may vary due to size tolerances of the combinations and of the countertop cut-out

Rating

Connection cable 2.0 m between ventilation element VL 414 and control knob AA 490.

View full details