400 series, Wall Hood, 63'', Stainless steel, AW442760 Gaggenau AW442760
400 series, Wall Hood, 63'', Stainless steel, AW442760 Gaggenau AW442760
  • Load image into Gallery viewer, 400 series, Wall Hood, 63'', Stainless steel, AW442760 Gaggenau AW442760
  • Load image into Gallery viewer, 400 series, Wall Hood, 63'', Stainless steel, AW442760 Gaggenau AW442760

400 series, Wall Hood, 63'', Stainless steel, AW442760

  • Professional technology hood combined with classic Gaggenau design
  • Highly efficient extraction of cooking vapours due to large vapour collection area
  • Motorless, can be combined with Gaggenau BLDC remote fan units
  • Angled baffle filter with high grease absorption
  • Function for automatic, sensor-controlled power adjustment depending on the build-up of cooking vapours
  • Dimmable, neutral white surface LED light for ideal illumination of the whole cooktop
  • Air extraction or air recirculation system
  • Air recirculation module with activated charcoal filter: quiet and highly efficient air recirculation solution with odour reduction as in air extraction mode and long replacement intervals
Output
  • Power levels depend on the remote fan unit, see table on page XX.
Features
  • 3 electronically controlled power levels and 1 intensive mode.
  • Automatic function with sensor-controlled run-on function.
  • Grease filter saturation indicator.
  • Baffle filter, dishwasher-safe.
  • Neutral white surface LED light (3500 K), continuously dimmable.
  • Lamp output 4 x LED light bars 10W.
  • Illuminance 1010 lx.
  • Easy mounting system for simple installation and alignment.
Planning notes
  • Refer to the table on page XX for the matching remote fan units for air recirculation or air extraction mode.
  • The two-part chimney must be ordered as an installation accessory.
  • Connection to the respective appliances via network cable.
  • Clearance above gas appliances min. 70 cm.
  • Clearance above electric appliances min. 60 cm.
  • Air recirculation module with 2 activated charcoal filters is installed in the inner chimney. Special air recirculation chimneys are available for this.
  • When installing a ventilation hood with air extraction mode and a chimney-vented fireplace, the power supply line of the ventilation appliance needs a suitable safety switch.
Connection
  • Total connected load 50 W.
  • Connecting cable 0.9 m, pluggable.

For more details:

user_manual_IU_AW442760

product_data_sheet_AW442760

user_manual_II_AW442760